Indicators
The complexity and quantity of status indicators were
intentionally kept to a minimum on the NC12L12. The two dual color LEDs smartly
show when the batteries are being charged by the green section of the top LED.
When the controller is regulating the RED section of the top LED shows RED. When
the load is ON the lower LED will glow Green, and when the controller is in Low
Voltage Disconnect by the lower LED will glow RED.
Features
Waterproof packaging.
Reverse polarity protected on battery wires.
Easy to read LED indicators clearly
display the controller's status.
High efficiency charging circuitry. Insertion Loss
resistance of only 0.080 Ohms on 12A Model, 0.008 Ohms on the 30A
model.
Field select for 12V or 24V operation.
Shipped ready for 12V systems, simply cut a wire jumper for 24V
Order with Load ON at Dusk, OFF at Dawn operation, or Load
always ON.
Low battery voltage Load Disconnect (LVD)
and automatic LVD reset at dawn (A SES Flexcharge Patented feature).
Manual Load Test / LVD Reset magnetically operated switch
located under the load status indicator. Easily reset the LVD circuit after
installation and test the controller's load circuitry.
Delayed Low Battery Disconnect to
prevent disconnect during momentarily high load currents.
Delayed Dawn sensing circuit to prevent load switching
during momentarily bright light levels (i.e. Lightning flashes, vehicle lights).
Small enclosure 3"H x 3"W x 1.5"D +
mounting feet.
◄◄◄ controller manual pdf file.
