|


| |
Model PC250
PULSE ENERGY UNITS LISTED BELOW
PWM POWERCENTER WITH DIGITAL METERING
 PC250 Power Center
↑

Shown with Inverter Attached
↑
|
Connect Energy has integrated all of the
"balance-of-systems" items commonly needed to install a solar electric
system into one compact, easy to install package. The PC250 is UL Listed for
safety and is built to make the installation of a single inverter easier
than ever.
Standard features include an advanced 60 Amp pulse width modulated (PWM)
multi-stage charge controller, plus all of the AC and DC disconnects and
overcurrent protection required by the National Electric Code (NEC).
|
Digital Metering
The PC250 also comes standard with an integrated digital meter. With the
touch of a button the PC250 displays the system's operational status on an
illuminated LCD screen.
The last remaining units have
NO LCD Meter, they have LED type scale for battery monitoring
Metering Features:
Charging stage (Bulk, Float, Equalization)
Charge Set-Points (Bulk, Float)
Input Voltage, Battery Voltage
Input Amps, Input Amps (Max), Input Watts
Input Amp-hours today, Total Input Amp-hours accumulated
Equalization Start/Stop (for flooded batteries only)
Options allow for easy expansion or customization to meet your system's
needs now and in the future.
|
Options
GFDI-250 - Ground fault detector and interrupter for roof-mounted arrays.
5A60ADD-250-XX - Additional 60 Amp charge control relay with DC circuit
breaker. Voltage specific, (Up to 1 additional Input)
BTC25 - Remote battery temperature compensation probe. 25-foot (8m) cable
included.
Main Inverter Disconnects
One 250 Amp inverter breaker/disconnect, rated at 125 VDC & 10,000 Amps
Interrupting Capacity (AIC). Provides National Electric Code (NEC) required
over current protection for high current inverter circuits.
|
Metering Options
In addition to the digital display the PC250's standard configuration
allows for easy installation of a meter to monitor Net-Amp hours. Includes
500Amp/50 mv shunt and remote terminal block wired for external meter. Other
Amp hour meters can be installed by determining the Manufactures connections
for Voltage Sense and Current at the remote terminal block.
Advanced 60Amp PWM Charge Controller with PV Input Breaker
Solid-state 60 Amp, microprocessor based pulse width modulated (PWM) charge
control with multi-stage charging algorithms (Bulk, Absorb, Float).
One 60 Amp PV input breaker with #1/0 AWG terminal lugs with two remaining
DC breaker slots.
Field configurable for 12, 24 or 48 volt operation.
Field adjustable Bulk and Float set points plus factory calibrated defaults
for Flooded Lead Acid, Sealed Gel or AGM batteries.
Digital LCD, displays battery state of charge and system status. Additional
status indicators show array charging and low battery.
Automatic and manual equalization modes for flooded batteries.
Protected against surges, reverse polarity, short circuit, over temperature
and overload conditions.
Rated for continuous operation at 60 Amps.
Automatic Nighttime Disconnect - Automatically disconnects the array from
the battery at night to prevent back feeding of current through the array.
No power-robbing diodes needed.
Terminals provided for External Battery Voltage Sensing. |
AC Section with
Input/Output/Bypass Breakers
60 Amp AC inverter bypass configuration allows loads to be powered
directly from external AC power source.
System Integration
Courier shippable powder coated enclosure, conduit ready with knockouts
conveniently placed for easy mounting of the inverter.
Current shunt/bonding block accepts #4/0AWG fine strand cable.
Meets the NEC requirements for overcurrent protection and "means of
disconnect".
Net Weight
Weight 26.5 lbs. (12kg.)
Depth 6.25 in. (15.9 cm.)
Width 15.75 in. (40 cm.)
Height 24.25 in. (61.6cm.)
Shipping Weight
Weight 31 lbs. (14kg.)
Depth 10in. (25.4 cm.)
Width 17 in. (43.2 cm.)
Height 29.5 in. (74.9 cm.)
|
The Units below are PULSE ENERGY systems but are of the same MFG as Connect
Energy
| PC250 |
Pulse Energy --- PC 250
Power Center This Unit has a
Ground Fault Breaker installed, the
Battery charge controller is an LED scale type not LCD panel |
|
|
| PC250 |
Pu;seEnergy --- PC 250
Power Center the Battery charge controller is an LED scale
type not LCD panel |
|
|

|