|
| |
Diversion LOAD or Dump Load
3 MODELS
WIND GENERATOR DIVERSION LOADS
STICKY PAD Diversion LOAD,, great for HOT WATER TANK SURFACE
or any other location where heat is desired
 |
Rated at 30 amps
on a 12 volt system.
If connected in series a pair of
them would be 30 amps at 24 volts.
and if (2) were placed in
Parallel at 12vdc then the rating would be 60 amps.
The Pad comes as a kit.
The back of the pad has a self stick surface and we also supply a tube of
high temp silicon to seal the edges.
There is a piece of sand paper to clean the surface before the pad is
installed and a squeegee for pushing down the pad to work out any air
bubbles. |
|
PAD KIT |
30 amps on a 12
volt System
you would need (2) in Series for 30
amps 24vdc
|
DIVERT LOADS BELOW
 14.13"L
x 6.88"W x 5.38"Hrated 6.1 ohms at 60volts DC = 590 watts
at 48vdc =377 watts
1/2" Knockouts Powered Coated GRAY
** Popular DIVERT LOAD for small wind TURBINE |
|
 |
XL1 Diversion LOAD
or DUMP LOAD |
Price with free shipping in the 48 states:::::
$ 350.00
|
XL1DIVERT |
1800 watt, 30vdc, 60amp 1800 watt, 24vdc, 75
amp
|
BELOW
DIVERT LOAD or DUMP LOAD
Air Diversion Load
1800 watt, 30vdc, 60amp
1800 watt, 24vdc, 75
amp NEMA 3r Rated
NOW Powder Coated GRAY
FILDump |
1800 watt, 30vdc, 60amp 1800 watt, 24vdc, 75
amp
|
|
