|
| |
Aerovironment AC Pump Controller:
The AeroVironment AC controller is a universal solar pump
controller designed to work with any AC motor from 0.5 to 5 HP. Pump controllers
feature an efficient microprocessor controller, a field adjustable frequency
control, fault detection and LCD display and come in a lockable NEMA 3R
enclosure. AeroVironment controllers can be used with any 3-phase and single
phase 3-wire motor. These controllers require 210-385VDC and 15-23 PV modules in
series. Wattage will vary according to pumping requirements.
Standard Features
 | Fault detection and LED display |
| System protection
 | Dry well |
| Reverse Polarity on DC bus |
| Output Overload |
| Output short circuit |
| Over Voltage |
| Lightning |
| Over Temperature |
|
| System temperature regulation
| System temperature regulated with output power,
no shutdowns on hot days |
|
| Remote shutdown switch
| No starter box required for single phase motors |
|
| Selectable minimum speed (10, 20, 30, or 40 Hz)
| Minimizes wear on pump under no-flow conditions |
|
| Selectable nominal motor speed (50 and 60 Hz motors) |
| Selectable motor voltage (110-120, 200-208,
220-240 VAC) |
| Selectable motor phase (single and three phase motors) |
| Local and remote monitoring ready (RS-232)
|
| Rugged NEMA 3, steel enclosure |
| 2 year standard warranty |
| UL certified |
Output Specs
Power Max. Sustained 2.2 kW
Output Voltages
115, 208, 230 VAC
Max. Current
13 Amps / 9.5
Amps RMS
Selectable Min. Speeds 10, 20, 30, or 40 Hz
Nominal Motor Speeds 50 or 60 Hz
Selectable Incr. Speed +5 Hz
Waveform
PWM Sine-wave
Efficiency
97%
|
Input Specs
Max PV Array Voc
600 VDC
Max Isc
8 Amps
PV Array Opt. Voltage:
210 VDC(115 VAC motors)
340 VDC(230 VAC, 3 phase motors)
385 VDC(230
VAC, 1 phase motors) |
Pump Compatibility
| ANY standard three phase or three wire single
phase motor
| Standard voltages (110-120, 200-208, and 220-240 VAC) |
| Standard motor speeds (50 and 60 Hz) |
|
USPC-2000 |
| 
USPC-2000 |
|
USPC-5000 |
|
USPC-5000 |
|
|
