Grundfos SQFlex Solar

Wide voltage range

The wide voltage range enables the motor to operate at any voltage from 30-300 VDC or 90-240 VAC. This makes installation and sizing especially easy.

Interface Boxes

The IO 100 switch box is designed specifically for solar powered SQFlex systems.
The IO 100 enables manual starting and stopping of the pump in an SQFlex Solar system and functions as a connection box joining all necessary cables

CU 200
A user-friendly interface box that maintains two-way communication with the pump and monitors the operating conditions. Built-in diagnostics indicate faults and dry-running, display operating status power consumption and level switch input.


 

GF43 SOLAR MODULE
Specifically designed to power the SQFlex system, the GF43 produces a high DC voltage of 140VDC, reducing losses through cables and providing peak efficiency for the SQFlex pump. Each GF43 is capable of producing 43 watts of peak power and is designed to be connected in parallel with other GF43's. This allows the SQFlex system to be optimized to your location & water requirements.
 

THE GF 43 is No Longer Available, other Solar Panels will work OK
The GF 43 solar panel is of the amorphous silicon, thin-film type.
The solar panel is equipped with plugs and sockets for easy connection of several panels. The solar panels must be mounted on a support structure, tilted at an angle ensuring optimum utilization of the solar energy.

Row closure kit, inclusive of ground clips and grounding terminal for four GF 43 or GF 50 solar modules.
The row closure kit is required for finishing a row of GF 43 or GF 50 solar modules.
 

Solar Components

Wind Components

NORTHWEST POWER CO, LLC
Mailing to: P.O. Box 271 Platteville, CO 80651   Location: 303 Elizabeth Ave Platteville, CO 80651
Phone # 970-785-2707       FAX: # 970-785-2713

Email at: info@nwpwr.com
Last modified: 04/26/08